CURT 12,000/14,000-LB. CLASS V RECEIVERS BY

Select Vehicle

Priced from:

$198.51 - $446.54
Product #: 21983G Brand: Curt
5 stars 5 out of 5 stars 4 review(s)
Features
  • The strongest we sell-compensates for oversized tires and springs that lift truck high off the ground
  • Extra-long, extra-thick metal hangers distribute weight of big loads
  • Bolts easily to fram-no welding!
  • For Class III, IV or V towing
Has a 12,000-lb. weight carrying capacity (1,200-lb. tongue weight) as a frame hitch without weight-distributing hitch. Has a 14,000-lb. weight carrying capacity (1,400-lb. tongue weight) as a frame hitch with weight-distributing hitch. Accepts a variety of standard 2 in. ball mounts (sold separately) and allows for easy height adjustments. Forged ring collar around receiver tube provides extra strength for heavy-duty use. Structural parts are hidden under truck so there's nothing to detract. Receiver mounts on truck with factory bumper, step bumper or no rear bumper. V-5 rated so it meets or exceeds SAE standards. Comes with manufacturer's lifetime warranty.

Overall Rating
5 out of 5
5 out of 5
Open Ratings Snapshot
Rating breakdown 4 reviews
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
4 of 4(100%)reviewers would recommend this product to a friend.
Product ReviewsWrite a review
Overall Rating
5 out of 5
5 out of 5
Great hitch
May 5, 2009
breeze400
Location: Holland, NY.
How often do you shop at JC Whitney.com? First Time
"I installed this hitch myself in about 15 minutes! Bolted right on! Got my boat out of storage the other day. Handles it just fine! About 8,000 lbs."
Pros: Easy install. Great fit!
Cons: Need A bit more room for factury trailler wireing.
+11points
11out of 11found this review helpful.
Was this helpful?helpful11unhelpful0
Overall Rating
5 out of 5
5 out of 5
Fits its discription perfectly
October 28, 2008
FreightShaker
Location: Honey Brook , Pa.
How often do you shop at JC Whitney.com? Once a Year
"I removed my old hitch & installed new one by myself in about an hour with no problems.It fit perfectly on my 1997 Dodge Ram 1500 Sport short-bed.This is an industrial duty hitch,probably the best built hitch I've ever bought. And I've purchased a few of them through the years, including brand names like Hidden-Hitch, Draw-Tite & Reese.This hitch is not the weak link between Truck & Trailer and I would recommend it to anyone"
Pros: Frame to Hitch Bolt holes line up perfectly
Cons: None
+1point
1out of 1found this review helpful.
Was this helpful?helpful1unhelpful0
Overall Rating
5 out of 5
5 out of 5
Great Hitch !
April 16, 2008
bill52
How often do you shop at JC Whitney.com? Multiple Times a Year
"This hitch is much heavier and stronger than my stock GM hitch !!The fit was great. You don't need any help taking the old hitch off, but you'll need someone to help you until you get a couple bolts in this hitch.."
Pros: Perfect Fit !
Cons: None.
+1point
1out of 1found this review helpful.
Was this helpful?helpful1unhelpful0
Overall Rating
5 out of 5
5 out of 5
Curt Class V installed on 2000 Ford F350 SD
January 23, 2007
thestuarts
Location: Seattle, WA
How often do you shop at JC Whitney.com? First Time
"I replaced the stock trailer hitch (6,000 lb rating) on my 2000 Ford F350 Super Duty Crew Cab Dually with the Curt 12,000/14,000 Class V receiver.
The removal of the old reciever took about 5 minutes (simply removed 8 bolts). The old hitch was fairly light; I performed the removal by myself on the ground without jacking up the vehicle.
However, I was unable to install the Curt hitch by myself be cause it weighs 63 lbs. While on my back I couldn't balance the hitch and get bolts started. I asked a neighbor to help.
With my neighbor's assistance the installation took approximately 30 minutes. It was easier to access some of the bolts by removing the spare tire. The stock trailer wiring harness touched the Curt hitch which was easily fixed by simply bending the wiring mounting plate about half an inch.
We torqued the grade 5 bolts to 110 ft-lbs, then the install was finished!
A very easy job overall, and the hitch looks absolutely amazing... industrial quality for sure."
+16points
16out of 16found this review helpful.
Was this helpful?helpful16unhelpful0
HIDDEN HITCH 87000 SERIES RECEIVER HITCH Priced from: $88.54 Sold individually
CURT CLASS II RECEIVER HITCHES Priced from: $71.52 Sold individually
HIDDEN HITCH 60000 SERIES RECEIVER HITCH Priced from: $97.12 Sold individually
DRAW TITE DRAW-TITE RECEIVER HITCH Priced from: $155.88 Sold individually
CURT 10,000/12,000-LB. CLASS IV RECEIVERS Priced from: $149.79 Sold individually
REESE PROFESSIONAL SERIES RECEIVER HITCH Priced from: $101.05 Sold individually
HIDDEN HITCH 90000 SERIES RECEIVER HITCH Priced from: $76.94 Sold individually
HIDDEN HITCH 82000 SERIES RECEIVER HITCH Priced from: $168.98 Sold individually

Unfortunately, we just checked our inventory and this item is now out of stock. Please check back with us in 24-48 hours.

We apologize for the inconvenience.

See other Trailer Hitches available.

Auto MD Easy to use Q&A diagnostic tool Get fair and objective estimates for reparis Search over 400,000 repair shops Auto MD