Adds custom styling and relocates crankcase breather hose to best location for maximum filtered venting
Replacement filter with chromed cap sold separately
Eliminates the unsightly hose left dangling behind the engine or transmission when hose has been disconnected or when a custom air cleaner without breather fittings is being used. Also reduces the breather noise caused when the vent hose is not connected to original air box. Approx. 2in. diameter paper and wire mesh filter has chrome-plated molded-on plastic cap. Teardrop-shaped mounting plate is made of chrome-plated die-cast metal. Clamp attaches filter to both the mounting plate and venting hose. Plate has pre-drilled hole for easy mounting using existing bolt.
Rating breakdown1 review
1 of 1(100%)reviewers would recommend this product to a friend.
How often do you shop at JC Whitney.com? Multiple Times a Year
"Nicely made filter, great chrome and feels well made. The filter/screen looks good too, great for the money. However, if you don't get the relocation mount kit you have no way to attach it and go. I'll have to cut my hose and buy a clamp in order to use this, it does not fit properly into the engine breather box. Overall it looks great but they should at least include a 1/2" hose clamp. I used this on my '81 Yamaha XS850 triple. It looks good and would work great on any custom bike, worth the money but go out and get a hose clamp if you don't get the kit."
Pros: Good looking, well made
Cons: No way to mount it w/o the extra kit
3out of3found this review helpful.
Was this helpful?helpful3unhelpful0http://jcwhitney.ugc.bazaarvoice.com/1915-en_us/15468G/review/8642790/undohelpfulness.djs?format=embeddedhtml&sessionparams=__BVSESSIONPARAMS__&return=__RETURN__&innerreturn=http%3A%2F%2Fjcwhitney.ugc.bazaarvoice.com%2F1915-en_us%2F15468G%2Freviews.htm%3Fformat%3Dembedded&user=__USERID__&authsourcetype=__AUTHTYPE__&submissionparams=__BVSUBMISSIONPARAMETERS__&submissionurl=__BVSUBMISSIONURL__