CLASS III 2" RECEIVER HITCH

• Adds towing capability to Wranglers
• Capacity up to 3,500 lb. GTW and 300 lb. TW
• Features rust-resistant black powder coat finish

Made of heavy-duty steel-strong enough to handle maximum tow load up to 3,500 lb. GTW and 300 lb. TW on your Jeep®. Accepts 2" drawbar and 5/8" hitch pin. No need for drilling holes on unmodified frame. Will not fit Jeep® with 20-gal. gas tank. Limited lifetime warranty. Note: Do not exceed vehicle's rated towing capacity.

Wiring the Taillights

If a Plug-in T-Connector Harness is available for your vehicle, then it plugs directly into the wiring harness by terminating with a flat 4-plug connector and eliminates the need to cut and splice wires. These T-Connectors include the appropriate taillight converter or powered taillight converter, if your vehicle requires one. When a T-Connecter is not available choose a wiring kit that provides for splicing into the vehicle's wiring harness. An ideal wiring kit for the vehicle is based on the number of poles and the shape of the connector.

If your receiver application has a "T" Wire code, we have a T-Connector for your vehicle. If your Receiver Application notes "C" or "P", then you need an appropriate wire kit in addition to the Taillight Converter or Powered Taillight Converter respectively. If "W" is noted in the receiver application, then only the wiring kit is required.

Order all converters and connectors separately.