HIDDEN HITCH CLASS III RECEIVER HITCH

Product Number: 19941G 108 reviews
To guarantee
this product will fit your vehicle, please select your vehicle's Year, Make and Model.
SELECT YOUR VEHICLE

Priced from

$89.99 - $279.17
CLASS III RECEIVER HITCH
  • For Class III and Class IV towing on trucks, cars, SUVs and vans
  • Weight carrying capacity of 3,000-6,000 lb. and TW of 300-600 lb.
  • Custom designed for easy bolt-on installation to vehicle's frame with minimal or no drilling for most applications
Features black powder coat rust-resistant finish that exceeds 500-hour spray-testing (equal to 5 winters). Up to 10,000 lb. GTW (Gross Towing Weight) when used with a weight-distributing hitch, 3,000 to 6,000 lb. weight-carrying capacity, 300 to 600 lb. tongue weight. Long, wide frame brackets for maximum strength and load distribution. Attach to vehicle's frame with minimal or no drilling. Long, wide frame brackets for maximum strength and better load distribution. Powder coat process inside of receiver channel-the first place rust normally occurs. Some applications include wiring connector bracket for easier electrical hookup and no dangling wires. Accepts 2" square ball mounts in a variety of lengths, drops and rise to level trailer tongue. Ball mounts sold separately. Meets or exceeds SAE standards. Do not exceed rated tow capacity of towing vehicle. Limited lifetime warranty.

Other accessories to be ordered separately include: Trailer ball, hitch lock, safety chain, taillight connectors and converters (see table below), brake controller and transmission cooler.

How To Order Trailer Hitches.

Determine the Gross Towing Weight (GTW) and tongue weight (TW) of your trailer. The GTW is the weight of the trailer fully loaded and ready for towing. The TW is the downward push exerted on the hitch ball by the trailer coupler.Check your owner's manual to find the maximum GTW and TW for your vehicle. Important: Do not tow the trailer if either the GTW or the TW exceeds the towing vehicle's maximum towing capacity.

GTW=Gross Trailer Weight
TW=Tongue Weight

How To Order Taillight Wiring Connections.

Taillight Wiring Connection

Your vehicle lists:
  • T-Connector:
    A T-Connector plugs directly into the wiring harness and terminates with a flat 4-plug connector and eliminates the need to cut and splice wires. T-Connectors include the appropriate taillight converter or powered taillight converter, if required.

    Scroll down to recommended accessories and select the following:
    1) Select correct T-connector for your vehicle (no cutting and splicing required).

  • Wiring Kit
    A Wiring Kit is provided for splicing into the vehicle's wiring harness. An ideal wiring kit for the vehicle is based on the number of poles and the shape of the connector.

    Scroll down to recommended accessories and select the following:
    1) Wiring kit with correct number of poles for your vehicle.

  • Converter
    Scroll down to recommended accessories and select each of the following:
    1) Converter
    2) Wiring kit with correct number of poles for your vehicle.

  • Power Converter
    Scroll down to recommended accessories and select each of the following:
    1) Power Converter
    2) Wiring kit with correct number of poles for your vehicle.
  • Select vehicle to view products that fit.

    Select Vehicle
    Overall Rating
    4.8 out of 5
    4.8 out of 5
    Open Ratings Snapshot
    Rating Snapshot (115 reviews)
    5 stars
    94
    4 stars
    18
    3 stars
    3
    2 stars
    0
    1 star
    0
    113 of 115(98%)customers would recommend this product to a friend.
    Product ReviewsReview This Product
    Overall Rating
    5 out of 5
    5 out of 5
    Easy Install
    March 23, 2007
    By Vinny6000
    from Asheville, NC
    Ease of Use/Installation
    5 out of 5
    5 out of 5
    Features
    5 out of 5
    5 out of 5
    Quality/Construction
    5 out of 5
    5 out of 5
    "1998 Jeep Cherokee
    Great Hitch. Everything was just as expected. I recently purchased a "universal" hitch from another company and spent 2 hrs trying to figure out how to put it together and install. Gave up and took it back to the auto parts store. I purchased this custom Hidden Hitch (it really is hidden, all you see is the receiver) and was able to install it in about 30-40 minutes by myself with a floor jack. I did need a 3 ft. breaker bar to loosen a few rusty bolts on my Jeep, but overall very impressed with ease of install. No missing bolts or parts. Great job JCW on selecting another great product to sell. Thanks.
    "
    How often do you shop at JC Whitney.com? Multiple Times a Year
    50 of 57 people found this review helpful.
    Overall Rating
    5 out of 5
    5 out of 5
    Installed on 2006 Chevy Silverado 1500
    March 17, 2007
    By M6zero
    from Temecula, CA
    Ease of Use/Installation
    5 out of 5
    5 out of 5
    Features
    5 out of 5
    5 out of 5
    Quality/Construction
    5 out of 5
    5 out of 5
    "I installed the Hidden Hitch on my 2006 Chevy Silverado 1500 2WD and everything went very smoothly. I installed it with the help of my 4-year-old daughter and did not have to remove the bumper, or drop the spare tire. The whole process could not have taken more than half an hour, from start to finish. And that's including the time it took to explain to my daughter which piece of hardware to bring me next!
    The directions were very simple and easy to follow. The hardware bag was shrink-wrapped to the hitch receiver, which prevented it from being lost during transportation. I could not have asked for an easier installation.
    The hitch looks great on my Silverado and I would definitely recommend this to anyone looking for a hitch receiver for their truck. I'm definitely going to buy from JC Whitney again!"
    How often do you shop at JC Whitney.com? First Time
    17 of 17 people found this review helpful.
    Overall Rating
    5 out of 5
    5 out of 5
    just what I needed
    May 24, 2012
    By skytrooper
    Pros: Quick and easy
    "Fit my 2010 nissan frontier like a glove.Not much else to say.Installed with a floor jack by myself in 30 minutes.Very happy with this product"
    Overall Rating
    5 out of 5
    5 out of 5
    Easy
    March 24, 2012
    By Clay
    from Virginia
    Pros: Easy install, quality product, fast delivery
    Cons: none
    "Installed it on a 2000 Suzuki Grand Vitara today. Other than fighting to get some existing bolts out of the mounting holes the installation was a breeze. On this particular vehicle you will have to remove a small component that acts as a heat shield for the gasoline tank from the exhaust pipe. Bring some penetrating oil, a hammer, and your patience for this part.
    Installation is basically idiot proof. High quality piece of equipment with top notch hardware. It's heavy so you might want an extra set of hands. I did it myself, so it's not impossible, just less hassle to have someone hold the other end while you start the first bolt.
    Delivery was only a few days from date of order, quicker than I expected. Nice fit and finish, definitely heavy duty enough to handle anything within this vehicles towing capacity. I would buy another one for any other vehicle I own in the future."
    How often do you shop at JC Whitney.com? Once a Year
    1-4 of 115
    CURT CLASS III HITCH RECEIVERS Priced from: $87.12 Sold individually
    CURT CLASS III ROUND TUBE HITCH RECEIVERS Priced from: $128.71 Sold individually
    REESE RECEIVER HITCH HITCH Priced from: $80.31 Sold individually
    CURT BUMPER HITCH Priced from: $82.28 Sold individually
    HIDDEN HITCH RECEIVER HITCH Priced from: $59.24 Sold individually
    CURT CLASS II RECEIVERS Priced from: $105.37 Sold individually
    CURT CLASS I RECEIVERS Priced from: $87.12 Sold individually
    CURT 10,000/12,000-LB. CLASS IV RECEIVERS Priced from: $148.49 Sold individually
    HIDDEN HITCH WEIGHT DISTRIBUTION HITCH Priced from: $92.34 Sold individually
    HIDDEN HITCH CLASS III AND IV ROUND-TUBE RECEIVER HITCHES Priced from: $145.67 Sold individually