CRANE CAMS UNIVERSAL POWERMAX PERFORMANCE POWER PROGRAMMER

• Change your vehicle speed limiter to match the speed rating of your tires
• Allows you to adjust the fuel power enrichment at Wide Open Throttle
• Adjust your speedometer/odometer to compensate for oversize/undersize tires within 1/4in. OD (24in. to 30in.)
• Adjust your speedometer/odometer/engine management system for changes in gear ratios (2.73 to 4.56 for most applications)
• Provide custom, high-performance tuning for your stock engine/transmission system
• Provide four levels of tuning for Crane Cams PowerMax camshafts in naturally aspirated engines and two levels for supercharged engines. Supercharged engines can be tuned for a stock cam or performance level cams.
• Optimize transmission shift points for new PowerMax cams
• Adjusts shift firmness for stock setup and performance setup
• Provides tuning adjustment for up to 30 different parameters for most stock applications
• Allows adjustment of idle speed in 50RPM increments
• Adjustment of pre-programmed spark curves +/- 10% to fine tune for free flowing exhaust and improved inlet systems
• Allows for installation of high flow fuel injectors that are sometimes necessary with supercharger applications. Will compensate with injectors that are up to 120% larger (higher flow rates) than stock.
• Works with all auto transmissions
• Disables skip shift feature with manual transmission applications
• Select cooling fan "on" setting
• Super-easy, five-minute installation. Just "Plug-n-Go"
• Easy return-to-stock anytime you choose
• Performance settings can be changed an infinite number of times.
• Reads diagnostic trouble codes and provides easy "clear code" function

Crane Cams PowerMax Performance Power Tuner is the finest, most flexible, hand-held engine/transmission tuner on the market today. You will definitely see a full throttle power improvement and a significant part throttle driveability improvement with the stock camshaft; however, the real benefits of your Crane PowerMax Performance Power Tuner are realized with the improved engine breathing provided by a Crane PowerMax camshaft.