When shopping for a new Door Handle for your repairs, you can always trust JC Whitney to deliver what you need. We have one of the widest selections of high-quality parts from no less than the best brands in the industry. Shop now and get the right Door Handle with the perfect fit for your ride!
Having a broken door handle is not only a big inconvenience, but it also makes your vehicle vulnerable to theft. So, if you don't want to lose your precious car any time soon, you'd better replace that busted handle ASAP.
When buying door handles, you'll find several materials available in the market today. All these door handle materials come in different colors/finishes. You can get some in one color but combination colors are available as well.
A set of two door handles usually costs around $50-100. But if you only need one for your repairs, you can get a single piece for $50 or less.
Here's a general guide that you can follow to get started with fixing your vehicle's car door handles. Depending on the vehicle that you drive, some of the steps below may be different.
Tools that you'll need:
Step 1: To remove the door handle, you need to remove the inner door panel first. This panel is usually attached using plastic clips, making them easy to remove. Be very careful when snapping the panel off to avoid damaging the upholstery of your vehicle. Pull it with caution using just the right amount of pressure.
Step 2: After removing the panel, look for the door's water deflector paper. If your vehicle is equipped with one, carefully peel it off to get it out of the way.
Step 3: Next, remove all the wires and linkages connected to your current handle. You can label these using the masking tape to make the reinstallation process easier.
Step 4: Finally, you can take the old handle out by unbolting it using the screwdriver and/or wrench.
Step 5: As soon as you've removed the old handle, install the new one and make sure it is positioned correctly before bolting it in place. Note that aftermarket door handles usually come with their own set of mounting hardware.
Step 6: Once the new door handle is in place, reconnect the wires, linkages, and connections that you removed earlier. Test the new part out too see if it works before reinstalling the water deflector paper and inner door panel.