AFE MAGNUM FORCE STAGE 2 PERFORMANCE COLD AIR INTAKE SYSTEMS WITH PRO DRY OIL-FREE FILTER

Product Number: 29163G 2 reviews
To guarantee
this product will fit your vehicle, please select your vehicle's Year, Make and Model.
SELECT YOUR VEHICLE

Priced from

$159.00 - $729.00
MAGNUM FORCE STAGE 2 AIR INTAKE SYSTEM WITH PRO DRY S™ OIL-FREE FILTER
  • The only choice if you want all the power and torque you can get!
  • Replaces factory air box, stock air filter and factory intake tube
  • Improves airflow up to 75%
  • Improves throttle response, acceleration and fuel efficiency
  • Up to 60 ft./lbs. more of torque! Up to 50 HP gains!
  • Includes Pro Dry S™ oil-free filter-the easiest to service!
Cold air equals more power! That's why the Magnum FORCE Stage 2 Intake System replaces the entire stock air induction system...so the absolute largest air box (and the largest filter!) can be used for your make and model. This guarantees that your vehicle gets the maximum amount of air regardless of the performance upgrades.

To further maximize airflow, heat-blocking roto-molded plastic housings and intake tube (not steel or aluminum) are used to eliminate the kinks, sharp bends and obstructions that can restrict airflow. The tube is tapered to accelerate airflow for more torque and better throttle response. Tube design also means the factory MAF sensor is positioned in the best spot to give you peak performance without triggering the CEL. Other 16-gauge steel components have a durable powder coated finish for an OE look. All trim is sealed or covered to lock out hot engine air.

Easy to install! Although the stock air box, filter and intake tract are eliminated, the Magnum FORCE retains and works with your stock electronics. All stock mounting points are retained-no cutting or drilling is required. Secured PEM nuts and welded and preassembled sheet metal speed up installation. Prepositioned opening for stock attachments means no dangling wires or hose/tube relocation. System comes with a limited lifetime warranty. Fits American and Imported Cars, Pickups and SUVs.

Pro Dry S™ Filter. Easiest to use and never needs oiling! It's the perfect balance of performance, protection and convenience! Offers 99.4% filtration efficiency for engine protection plus 50% higher airflow than stock. Also increases horsepower and torque and improves fuel economy. Pro Dry S™ Filters incorporates two inner layers of randomly porous dry synthetic fabric to trap dust particles plus inner and outer screens for strength and support. Tall, rounded pleats significantly increase airflow and dust-holding capacity. Easier to service than oil-impregnated or foam filters-simply tap it, vacuum it or wash it with soap and water to clean. Comes with limited lifetime warranty.

AFE Air Intake Rebate

Select vehicle to view products that fit.

Select Vehicle
Overall Rating
4 out of 5
4 out of 5
Open Ratings Snapshot
Rating Snapshot (2 reviews)
5 stars
1
4 stars
0
3 stars
1
2 stars
0
1 star
0
1 of 2(50%)customers would recommend this product to a friend.
Product ReviewsReview This Product
Overall Rating
3 out of 5
3 out of 5
Decent Product
June 30, 2009
By Carguy28
from Fort Worth,TX
Pros: Horsepower and throttle response are better
Cons: Lost about 40 to 50 miles per tank of gas
"I have a 2007 Honda Civic, which I got 28 miles on the street and 38 on the highway. I thought I would shoot for 40 miles per gallon with a cold air intake. I was wrong. My car has a deeper sound to the exhaust. The horsepower and throttle response are better, but I lost almost 50 miles between each time i have to fill my car with gas."
How often do you shop at JC Whitney.com? Once a Year
22 of 28 people found this review helpful.
Overall Rating
5 out of 5
5 out of 5
Good product, good price
June 12, 2009
By LTCEric
from Charlottesville, VA
Pros: Simple design. Dry filter, Easy maintenance
Cons: Not quite "bolt-up" easy
"Box came complete. Instructions were pretty clear. Ended up having to bend the housing to match up a bolt hole and get it around a hard power steering tube. Also, had to cut the housing to make way for a rubber emissions hose. I used some slit plastic tubing to cushion the power steering tube and the new cut on the housing so as not to cut the emissions hose with the sharp edge. Housing is also about 1/8th inch too high so hood sticks up a bit, but will probably settle as the insulation mashes down. Noticed an increase in power. Sounds great when I jump on the throttle. Worth the price."
How often do you shop at JC Whitney.com? Multiple Times a Year
25 of 29 people found this review helpful.