HEARTTHROB EXHAUST MANIFOLD DUAL EXHAUST SYSTEM

Select Vehicle

Priced from:

$168.18 - $343.69
Product #: 2039611G Brand: Heartthrob Exhaust
Customer Rating: 5 of 5 stars
Features

HEARTTHROB EXHAUST – MANIFOLD-BACK DUAL EXIT EXHAUST SYSTEMS

  • Made in USA
  • Flow bench and dyno tested for quality
  • Mandrel bent tubing for no restrictions
  • Bolts to stock manifolds
  • Not street legal for vehicles that were equipped with catalytic converters from the factory
  • Stock exit, split rear exit or front exit in front of the rear tires, (depends on vehicle)
  • Front exit kits include glass pack mufflers
  • 2 ¼ inch aluminized tubing

The Heartthrob Manifold-Back Duel Exit Exhaust Systems are available for wide range of mostly older, trucks, SUVs and cars. This Heartthrob Exhaust is designed to give your vehicle maximum exhaust flow for maximum horsepower and torque gains along with a deep and powerful fire-breathing exhaust tone. Breathe new life into your classic vehicle with a Heartthrob Manifold Back Duel Exit Exhaust System and enjoy the driving experience even more. Founded over 37 years ago in Minnesota, Heartthrob Exhaust is a small family owned company specializing strictly in exhaust manufacturing. The 80,000 square foot factory is staffed by 30 loyal employees with extensive exhaust knowledge and utilizes state-of-the-art computer controlled CNC manufacturing equipment ensuring you with a proper fitting exhaust system.  

See product for application and installation details.



Overall Rating
5 out of 5
5 out of 5
Open Ratings Snapshot
Rating breakdown 4 reviews
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Ease of Use/Installation
4 out of 5
Quality/Construction
5 out of 5
4 of 4(100%)reviewers would recommend this product to a friend.
Product ReviewsWrite a review
Overall Rating
5 out of 5
5 out of 5
Affordable dual exhaust system
September 10, 2014
olvarmint
Location: Oregon City, OR, USA
How often do you shop at JC Whitney.com? Multiple Times a Year
Ease of Use/Installation
5 out of 5
5 out of 5
Quality/Construction
5 out of 5
5 out of 5
" Very nice mandrel bends with nice thick tubing.Exhaust tone is hot rod aggressive .Thick enough to be welded with a MIG welder,plenty of quality hangers and clamps. "
0points
0out of 0found this review helpful.
Was this helpful?helpful0unhelpful0
Overall Rating
5 out of 5
5 out of 5
HEARTTHROB EXHAUST DUAL EXHAUST CONVERSION SYSTEMS
April 14, 2014
Anonymous
How often do you shop at JC Whitney.com? Multiple Times a Year
Ease of Use/Installation
3 out of 5
3 out of 5
Quality/Construction
5 out of 5
5 out of 5
" Nice product, like it!!! Interesting outside the frame mounting. "
0points
0out of 0found this review helpful.
Was this helpful?helpful0unhelpful0
Overall Rating
5 out of 5
5 out of 5
sporty1
July 20, 2010
Anonymous
Location: Billings, Montana
How often do you shop at JC Whitney.com? Once a Year
" I installed this kit on a Chevy longbed with a 131 1/2" wheelbase, The extensions specified for this kit so that it exits the vehicle in the proper location are not required. The kit will exit behind the rear tires without them. The extensions are needed if you wish to make the exhaust exit the rear of the vehicle under the bumber, you will have to cut the pipes at the bend. If extensions are ordered then you will require two clamps also to install them ( not included). The kit itself only comes with 6 clamps and it requires 8, besides the 2 needed for the extensions, for a total of 10. I had to go to a muffler shop to get the 4 extra clamps, I live out of town and it was annoying that they were not included as it was a hassle and a delay of two days because muffler shops are closed for the weekends. Overall though this is a kit that installs fairly easy and fits well except for the flange to the manifolds. The left pipe is slightly overbent, and the right pipe is slightly underbent. It posed a problem using the stock springs under the nuts to make the connection, the springs cannot draw the flange tight enough, I replaced the springs with a sleeve so that I was able to draw the flange up onto the donuts for a proper seal. I installed thrush welded mufflers with this set up, they were 19". The left side pipe into the front of the muffler needed a small portion trimmed off as it was bottoming out, I trimmed off 3 inches. I like the kit and I would recomend it to anyone. I hope this review is helpful, using my information there should be no unforseen problems with your instalation. "
Pros: fits well and sounds good, easy to install.
Cons: Left pipe to manifold over bent slightly, Right pipe to manifold overbent slightly. short two clamps.
+38points
42out of 46found this review helpful.
Was this helpful?helpful42unhelpful4
Overall Rating
5 out of 5
5 out of 5
CLASSIC TRUCKS
June 23, 2006
Jerald
Location: Walla Walla, WA
How often do you shop at JC Whitney.com? Once a Year
" I see a decent price product for a classic pickup that are hard to find unless you pay a lot for the exhaust system and can't have it installed uptown for that price either!
If you are a do it yourself person this is the place to shop, YEAH!
"
+29points
49out of 69found this review helpful.
Was this helpful?helpful49unhelpful20