AIRAID - MXP COLD AIR INTAKE SYSTEMS

Select Vehicle

On Sale

$0.00
Product #: 15567G Brand: Airaid
Customer Rating: 4.7 of 5 stars
AIRAID – MXP COLD AIR INTAKE SYSTEMS
  • Large 1-piece rotational molded air box creates cold air dam to block heat and draw in cool air
  • Improves cold air flow up to 20% which means a potential increase of up to 18 horsepower
  • Keeps air filter protected - even in deep water crossings
  • Features built-in velocity stack and redesigned intake tube for better air flow
  • Provides up to 99.99% filtration and up to 820 CFM
  • Includes either AIRAID SynthaMax (100% synthetic) or SynthaFlow (oiled) performance air filter
  • Computer-designed, dyno-tested and tuned for maximum horsepower, torque and performance
  • Hardware included
  • For gas or diesel vehicles
  • Installs in minutes - no special tools necessary
  • Lifetime ‘no-hassle’ warranty
  • Made in the USA

AIRAID’s MXP cold air intake system features a large, roto-molded air box and an air intake tube crafted from cross-linked, high-density polyethylene that maintain MAF readings for correct air-fuel ratio and calibration levels while dramatically improving performance. Most systems offer AIRAID’s next-generation SynthaMax dry air filter which doesn’t involve the cost or mess of periodic oiling OR an AIRAID SynthaFlow filter which requires periodic oiling like traditional filters. Both are washable and re-usable – it’s just a matter of personal preference. AIRAID, founded in 1997, is a state-of-the-art manufacturer of air intake systems for automotive enthusiasts looking for innovative, scientifically-proven ways to improve horsepower, torque and performance.

See product for application and installation details.

See product for application and installation details.



Overall Rating
4.7 out of 5
4.7 out of 5
Open Ratings Snapshot
Rating breakdown 24 reviews
5 Stars
20
4 Stars
3
3 Stars
0
2 Stars
0
1 Star
1
Ease of Use/Installation
4.3 out of 5
4.3 out of 5
Quality/Construction
4.5 out of 5
4.5 out of 5
23 of 24(96%)reviewers would recommend this product to a friend.
Product ReviewsWrite a review
Overall Rating
4 out of 5
4 out of 5
The intake I've had
April 8, 2014
GR8WHT
Location: Modesto, CA, USA
How often do you shop at JC Whitney.com? Multiple Times a Year
Ease of Use/Installation
4 out of 5
4 out of 5
Quality/Construction
4 out of 5
4 out of 5
"I've had three diesel trucks all Dodge Ram, I've never really had a bad thing to say about AirAid they seem to me to really be a good product.ive had other cold air intakes that are more expensive and don't even come close to performing anything like the AirAid."
0points
0out of 0found this review helpful.
Was this helpful?helpful0unhelpful0
Overall Rating
5 out of 5
5 out of 5
2014 Chevy Silverado 1500
April 7, 2014
Anonymous
Ease of Use/Installation
5 out of 5
5 out of 5
Quality/Construction
5 out of 5
5 out of 5
"This is a great product. Sounds amazing every time I push in on the gas. There's a noticeable gain in throttle response and a small gain in fuel economy, not much but when you drive a V8 any gain in mpg is a good thing."
0points
0out of 0found this review helpful.
Was this helpful?helpful0unhelpful0
Overall Rating
5 out of 5
5 out of 5
Great product!!
April 7, 2014
VDay
Location: Georgia, USA
How often do you shop at JC Whitney.com? Multiple Times a Year
Ease of Use/Installation
5 out of 5
5 out of 5
Quality/Construction
5 out of 5
5 out of 5
"Great product. It was easy to install and sound and performs great!"
0points
0out of 0found this review helpful.
Was this helpful?helpful0unhelpful0
Overall Rating
4 out of 5
4 out of 5
Issues with install, sounds great, not sure of MPG
December 25, 2013
Anonymous
Location: Parker, USA
How often do you shop at JC Whitney.com? First Time
Ease of Use/Installation
3 out of 5
3 out of 5
Quality/Construction
4 out of 5
4 out of 5
"Installed cold intake unit on 2013 premium edition Ford Mustang V6 coupe. Had two issues with install - 1) took a lot of patience and effort to install provided screws for air sensor into tube female inserts, thought screws or inserts were damaged; 2) unable to install rubber baffle over resulting original system opening after installing filter tube end into box as instructions indicated, had to install baffle over original opening first and then tube into baffle and finally filter end of tube into box.
Sounds great under moderate to aggressive acceleration, appear to get better acceleration at start up without previous observed lag, initial results are showing lower MPG than before installation which contradicts one of the advertised benefits - only time will tell if such benefit is actually true without reprogramming."
+1point
1out of 1found this review helpful.
Was this helpful?helpful1unhelpful0
1-4 of 24
Auto MD Easy to use Q&A diagnostic tool Get fair and objective estimates for reparis Search over 400,000 repair shops Auto MD