Product 5 of 13

SENSA-TRAC LOAD ADJUSTING TWIN-TUBE SHOCK BY MONROE

Select Vehicle

Sorry, there are no Performance Shock Absorbers that fit your
1957 Chevrolet Bel Air.


View all Shock Absorber and Strut Assemblys for
1957 Chevrolet Bel Air
Go to Car page

$86.31
SKU #: JCW-1074757 Manufacturer #: 58510 Brand: Monroe
Customer Rating: 4.8 of 5 stars

Monroe Sensa-Trac Load Adjusting Twin-Tube Shock Absorbers

  • Interior is nitrogen gas-charged to reduce aeration, creating good tire to road contact and improved handling and ride quality
  • Engineered with full displaced valving for an improved compression and extension cycles valving range
  • Equipped with the all-weather fluid, that contains special modifiers, to reduce friction for a smooth rod reaction
  • With fluon-banded piston that offers consistent sealing between the piston and pressure tube for better ride control
  • Engineered with a computer-designed heavy-gauge calibrated coil spring for superior performance without any harsh suspension feel

Enable your vehicle to give you the performance that you want by equipping it with the Monroe Sensa-Trac Load Adjusting Twin-Tube Shock Absorbers. Engineered with the PSD (position sensitive damping) and Safe Tech system, these Monroe dampers significantly improve your vehicle's riding quality and handling characteristics.



Overall Rating
4.8 out of 5
4.8 out of 5
Open Ratings Snapshot
Rating breakdown 35 reviews
5 Stars
28
4 Stars
6
3 Stars
1
2 Stars
0
1 Star
0
Ease of Use/Installation
4.5 out of 5
Quality/Construction
4.8 out of 5
35 of 35(100%)reviewers would recommend this product to a friend.
Product ReviewsWrite a review
Overall Rating
5 out of 5
5 out of 5
Very pleased
December 4, 2014
AmatuerCarMechanic
Location: Colorado
How often do you shop at JC Whitney.com? Once a Year
Ease of Use/Installation
5 out of 5
5 out of 5
Quality/Construction
5 out of 5
5 out of 5
" My truck rides like a new vehicle. The spring shocks lifted the rear end back where it should be and it still sat well with an extra 1000 pounds in the rear end. I had the machine shop compress the springs and hold them with zip ties. It cost me $20 to get them compressed and they went in easily. Once bolted, I cut the zip ties one-by-one evenly around the spring and held the cap in place while I did so. It worked beautifully. It took about 30 zip ties per spring to hold it well. "
+1point
1out of 1found this review helpful.
Was this helpful?helpful1unhelpful0
Overall Rating
5 out of 5
5 out of 5
Just the ticket!
December 1, 2014
Deadeye
Location: Iowa, USA
How often do you shop at JC Whitney.com? Multiple Times a Year
Ease of Use/Installation
5 out of 5
5 out of 5
Quality/Construction
5 out of 5
5 out of 5
" Installation was easy, the ride is much improved and my truck handles the load much better with the new booster shocks. They replaced a set of leaking air shocks. Raised the rear of my truck about 1.5" which is ok with me. very happy so far. "
+1point
1out of 1found this review helpful.
Was this helpful?helpful1unhelpful0
Overall Rating
5 out of 5
5 out of 5
Improved Ride
November 19, 2014
DavePA
Location: Pennsylvania
How often do you shop at JC Whitney.com? Multiple Times a Year
Ease of Use/Installation
5 out of 5
5 out of 5
Quality/Construction
5 out of 5
5 out of 5
" I have notice a much improved ride with these shocks in-addition to keeping the truck level under loads.
Very easy to install on rear axle of 2005 F150.
"
+2points
2out of 2found this review helpful.
Was this helpful?helpful2unhelpful0
Overall Rating
4 out of 5
4 out of 5
Great Product
November 11, 2014
raphunt
Location: sw WI
How often do you shop at JC Whitney.com? First Time
Ease of Use/Installation
4 out of 5
4 out of 5
Quality/Construction
4 out of 5
4 out of 5
" Easy to install, Improved handling and ride. Installed with Monroe Preloaded Strut and gave the truck about 1.5 in. of lift. Pulling my son's stock trailer I'll need to add helper springs. "
+2points
2out of 2found this review helpful.
Was this helpful?helpful2unhelpful0
1-4 of 35
KYB GR-2/EXCEL-G SERIES SHOCK ABSORBERS AND STRUT ASSEMBLIES Priced from: $19.92 Sold Individually
RANCHO SUSPENSION RANCHO RS5000 SHOCK ABSORBERS Priced from: $50.99 Sold Individually
MONROE QUICK-STRUT LOADED STRUT ASSEMBLY Priced from: $57.58 Sold Individually
RANCHO SUSPENSION RANCHO RS9000XL ADJUSTABLE SHOCK ABSORBERS Priced from: $110.99 Sold Individually
KYB GAS-A-JUST SHOCK ABSORBER AND STRUT ASSEMBLY Priced from: $23.48 Sold Individually
MONROE OESPECTRUM SHOCK ABSORBERS AND STRUT ASSEMBLIES Priced from: $18.07 Sold Individually
MONROE SHOCK ABSORBERS AND STRUT ASSEMBLIES Priced from: $18.07 Sold Individually
PRO COMP TIRES PRO COMP ES9000 SHOCK ABSORBERS Priced from: $43.99 Sold Individually