Driving at night or under harsh weather is always a challenge. Due to the scarcity of light and visibility, your chance of getting into an accident becomes even higher. So, if you're not satisfied with your headlights, consider installing additional lighting components that will help make your drives safer and more enjoyable. One good example is the driving light.a component that's usually installed in front of a car's grille. Getting this lighting fixture for your car will surely improve your nighttime driving because it will make you see more clearly and make you feel more secure. It also provides better illumination on the lower part of the road, which enables you to see debris and animals crossing the street more clearly. And apart from keeping you safe during your nighttime drives, this rugged and sporty-looking component is also an easy way to jazz up your ride's overall appearance. If you want to know more about this component, below is a quick guide that will help you out.
Features and Benefits of Driving Lights
Here are some of the things that you'll gain after installing driving lights on your ride.
- Better visibility
When the sun is out, you'll need to rely on your vehicle's lights for your driving. However, if you're in the countryside, there might not be enough streetlights, homes, or establishments that can help light up the way. This is where a driving light comes in handy as installing this component will definitely give you better visibility on the road.
You can use driving lights to communicate with other drivers from oncoming traffic. Other drivers will also be able to see you better even from a great distance, so they'll know what to do right away.
How to Install Driving Lights
Some vehicles have pre-built mounting holes at their air dams that can accommodate aftermarket lighting components like driving lights. If you want to install your new driving light behind the car's grille, check your local laws first because some don't allow this.
Step 1: To begin, drill screw holes to be able to fasten the mounting brackets to your desired location. These brackets are important because they will allow you to adjust the lighting component easily.
Step 2: After that, mount the driving lights to the brackets and secure them in place using the nuts and bolts included in the kit.
Step 3: As soon as the driving light is in position, you need to wire and connect it to make it easy to operate. Do this by connecting the positive wire leads of the component. After that, splice the wire leads into three to the output terminal of the light switch.
Step 4: The grounds or negative leads of the driving lights should be connected and grounded to the car's frame.
Step 5: Then, connect the input terminal of the driving light switch by wiring it t a hot fuse in the fuse panel. Press the wire onto the metal blade connector of the fuse and wrap the splices with electrical tape, making sure that the connection of the fuse is only on one pole. And lastly, check to see if the component works.