Driving with a busted headlight is not only against the law, but it also puts lives at stake. Most road accidents happen at night due to reduced visibility. And with a busted headlight, the stakes become even higher. So, before it's too late, replace your car's busted headlight bulb ASAP. To know about the options that you have, read below to learn about the different types of headlight bulbs in the market. Also, learn how to change your headlight bulb in four easy steps.
Three Types of Headlight Bulbs
To help you with your headlight bulb selection, here are the three types of bulbs sold in the market.
A large majority of cars on the streets today use halogen bulbs. If you're going to stick to this classic, you'd better look for those with energy-saving capabilities and brighter lights. These are designed to last longer and reduce your fuel consumption. Most halogen bulbs are also very affordable, and you can get them for less than $30.
Compared to halogen headlights that use a filament of metal to produce light, xenon lights work by using an arc of high-voltage current. In the past, this type of light was only seen in luxury cars. However, they are slowly making their way to common, family cars today. Xenon headlight bulbs typically cost around $50.
LED headlights are slowly gaining popularity. And compared to halogen and xenon lights, LED lights use simple semiconductors that can last for a long time. They also produce less heat, have lower carbon dioxide emissions, and require less energy. These lights are not ideal during winter, though, because they can easily freeze.
Four Steps to a New Headlight Bulb
Here's a quick and basic guide that you can follow to change your car's busted headlight bulb. Before you begin, make sure the hood is open and securely propped to avoid any accidents.
Difficulty level: Easy
Tools that you'll need:
- Phillips screwdriver
- New bulb
Step 1: Through the engine compartment of your vehicle, locate the headlight holder, which contains the bulb.
Step 2: As soon as you've located the holder, find the power wires at the base of the headlight and unplug them. Depending on your vehicle, these wires can be connected by a screw cap, plastic catch, or a metal clip. If you have a screw cap, loosen the connection my turning it counter-clockwise. If you have a plastic catch, find the small lever and push it down to unplug the wire. And if you have a metal clip, hold it tightly and pull it up.
Step 3: After unplugging the wires, take the back cover of the headlight holder out to access and remove the old bulb.
Step 4: Lastly, install the new bulb, handling it using a soft cloth to make sure that oil from your skin doesn't touch its surface. After that, put the headlight holder back, plug the power wires back, and test if it works.