If you're going to tow a trailer for your upcoming road trip, you'd better make sure that it's secure. If you're going to carry a boat, a motorcycle, or even an entire RV behind your truck, ensure its safety by investing in a hitch lock. This accessory is the most inexpensive way to drive away thieves from stealing your trailer. With this component installed, you don't have to worry about your trailer getting stolen even if you're on the road. To know more about this component, here's a buying and instructional guide that can get you started.
A hitch lock helps you keep the trailer hitch and receiver together until you remove it using a key. It basically protects your trailer by preventing anyone from lifting the receiver. In short, no one can unhitch the trailer when the lock is on. Here are the most common types of hitch locks that you'll find in the market:
- Receiver hitch locks - This lock fits crosswise into a hole on the receiver that's connected to the towing vehicle.
- Coupler lock - This lock is U-shaped and it fits over the coupler on the trailer's tongue.
When buying hitch locks, you need to make sure that you get one that will fit your trailer and hitch receiver. Keep in mind that there are different hitch classifications and they vary according to the amount of weight that they can carry.
- Class I . gross trailer weight of up to 2,000 lbs.
- Class II . gross trailer weight of up to 3,500 lbs.
- Class III . gross trailer weight of up to 5,000 lbs.
- Class IV . gross trailer weight of up to 10,000 lbs.
- Class V . gross trailer weight of 10,000 lbs. and above
Using a Hitch Lock
Using hitch locks to secure your trailer can be pretty easy. Here's a quick and basic guide on how to use hitch locks for ball or ring hitches.
Step 1: To begin, park the vehicle and unhook the trailer. After that, lower the wheel of the trailer, letting it to sit horizontally on the ground. Do this by turning the handle of the trailer hitch counterclockwise.
Step 2: Next, put wheel chocks behind the rear wheels of the trailer to avoid any accidents.
Step 3: After that, locate the locking tab of the ball or ring hitch and pull it up and down. At this point, the lock will end up pointing upwards.
Step 4: Next, hold the bottom of the hitch lock and place it underneath the ball or ring hitch.
Step 5: As soon as it's in position, place the top part of the lock on top of the hitch. During this step, make sure that you are able to align the metal shaft on top with the hole at the bottom of the hitch.
Step 6: When it's in position, press the top part of the lock down and mount it to the bottom to secure the connection. And lastly, use the key included in the kit to open the hitch lock if you need to use the trailer.