Select Your Vehicle

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Lens Cleaner

 Shop Lens Cleaner

When your vehicle is new, everything is awesome and shiny. But over time, a lot of its components will begin to deteriorate and show visible signs of damage. For instance, the lens of the headlights can become hazy or cloudy. This problem is caused by oxidation, and it often occurs after years of continued use and constant exposure to damage-causing elements. Good thing, the market now offers a wide variety of products and tools that will help you take care of the problem. This comes in the form of lens cleaners that are specifically designed to make cleaning the headlights fast and easy. To know how to clean your vehicle's headlights using a commercial or homemade cleaner, here's a quick guide to help you out.

Buying a Commercial Lens Cleaner

1. Match it with your lens. Read the lens cleaner's product description very carefully and see if it's harmful to any kind of material in the headlight.

2. Read the instructions carefully. When using the cleaner, follow the right procedure to prevent causing damage to the lens.

3. Buy a kit. To make your life easier, buy a lens cleaner kit that includes everything you need for the task. These kits typically include a cleaning solution, sponge, and polishing pad.

4. Take note of the price. Lens cleaners cost less than $50, making them easy on the pocket. To ensure you get a good product, purchase only from a reputable brand.

Cleaning the Headlights Using a Lens Cleaner

Step 1: Start by washing the lens thoroughly using a dishwashing liquid. Then, rinse it using water and wait for it to dry.

Step 2: Surround the lens with painter's tape and see to it that you cover its rubber seal. You can use a rubber spatula to press the tape down the car's body and a razor to trim any excess.

Step 3: Use a strip of 500-grit sandpaper to sand the lens of the headlights in a back-and-forth motion, switching directions every few seconds. Repeat this step until the lens become opaque. Note: You can use a foam sanding block or you can wrap the sandpaper onto a sponge to ensure even pressure distribution.

Step 4: When the entire surface of the lens is frosty, wipe it with a microfiber cloth and then rinse it using water.

Step 5: Next, spray the lens with soapy water and then use wet 1000-grit sandpaper to sand the surface of the headlights. Don't forget to spray soapy water every time you change directions while sanding.

Step 6: After covering the entire surface of the lens, rinse it and allow it to dry before repeating the wet-sanding process using 2000-grit sandpaper. Again, after covering the entire surface, rinse and dry the lens.

Step 7: Apply some headlight polish to the lens with the help of a microfiber cloth, making sure that you cover it thoroughly. Then, wash the lens using detergent and water before wiping it using rubbing alcohol and a lint-free towel. Lastly, spray some sealer onto the lens and spread it using the towel.