Mercedes Benz ML350 Parts And Mercedes Benz ML350 Accessories
Sign up for email updates on the latest exclusive offers
The Mercedes Benz ML350 is known for being a mid-size luxury crossover SUV. It belonged to the M-Class line the German car manufacturer introduced in 1997. It was in 2002, though, when the ML350 was launched on the market, both as a replacement and an addition. It debuted with a 3.7-liter V6 engine and continued to have the V6 on board until the 2015 model year. Despite its being a luxury SUV, the ML350 suffered from different air conditioning problems, which are caused by different factors. Here are the common problems, along with the necessary solutions.
The ML350 is equipped with an A/C compressor clutch, which engages the free-wheeling pulley. The compressor is responsible for ensuring that the refrigerant circulates in the system, so when it fails to function, the refrigerant will not flow through the system. While the clutch itself can be blamed, a faulty evaporator temperature sensor on the ML350 is often the culprit. A malfunctioning sensor will fail to initiate the A/C compressor clutch to engage, and therefore will be unsuccessful in pushing the refrigerant into the system.
In the case that the evaporator temperature sensor is busted, replacing it is necessary. Doing so is the best way to make sure that the air conditioner on your vehicle will blow out cool air. Removing the broken sensor and installing a new one will require skills and knowledge of the procedure. Therefore, sending your ML350 to a repair shop to have the replacement done is advised in the absence of the required DIY skills.
A common factor behind the air conditioning problems typical on the Mercedes Benz ML350 is a leak in the system. A leakage will result in a low refrigerant level, which will significantly reduce the ability of the A/C system to produce cool air. This explains why the air that comes out of the vent on your SUV tends to be warm. If this is the case, then it is necessary to perform tests that will help spot the leak.
Using a leak detection kit will help find the source of the leak. If this is unavailable, the alternative methods include the use of dye, as well as of sudsy soap with water. For a higher success rate in locating the leak, you can leave this task to the professionals over at the repair shop. Once the leak has been found, the necessary steps to prevent further leakage must be done.
Since there can be various reasons the air conditioner on your ML350 can fail, it is best to always check the A/C fuse. A blown fuse will simply cause problems to the entire system, rendering it useless and incapable of producing air. Therefore, it is always worth looking under the hood or the dash to check whether or not the fuse is in good condition. If you have a blown-out fuse, then immediately replace it with a new one. If there are no other culprits behind the air conditioning problem on your SUV, then installing a new A/C fuse should fix this.