Tailgate Light Bar
Driving at night can be extremely dangerous, especially if you're traveling through dimly lit roads. And no matter how careful of a driver you are, you can never predict when and where an accident might suddenly happen. If you happen to own a pickup truck, you can equip your ride with additional lighting components like a tailgate light bar. Adding this lighting fixture will definitely make your truck more visible to other drivers on the road, decreasing your chances of getting into an accident. But, aside from protecting you from possible road mishaps, adding a light bar to your tailgate is also a good way to jazz up the overall look of your ride without spending too much. At first look, this strip of light may seem simple, but seeing it illuminated at night really makes a big difference. If you want to learn more about this helpful customization piece, here's a quick guide that can help you out.
Helpful Buying Tips
You'll find tons of tailgate light bars in the market today, and they all seem the same so it's hard to choose. Here's a general guide that should help you make your purchase.
1. Choose LED. When looking for a suitable tailgate light bar for your vehicle, always choose LED over other types of lights. LED options are long-lasting, so you won't have to worry about replacing them after just a short period of time. They are also energy-efficient, making them environment-friendly.
2. Look for a multi-functional one. You see, some tailgate light bars also function as brake lights, turn signals, and reverse lights, so choose wisely to get more bang for your buck.
3. Go for waterproof. You probably take your truck off-roading sometimes (or almost all the time), so you encounter a fair amount of water splashes and mud. Remember to choose a tailgate light bar that has a waterproof circuit board to protect it from getting damaged.
4. Get a street legal and DOT-compliant piece. To avoid having trouble with the law, make sure you buy a component that's accepted and compatible to your ride.
Installing a tailgate light bar can be quite easy, so you can definitely do it yourself. Here's a guide that will help you get started.
Step 1: Before attaching the light bar onto your truck's tailgate, you need to make sure that the mounting surface is clean. If it's not clean, you can use a sponge and some warm, soapy water to remove any accumulated wax and dirt. Allow the surface to dry and then wipe it again using cleaner or rubbing alcohol.
Step 2: When the surface is completely dry, mark the mounting location of the new lighting component. Do this by holding the bar in position, making sure that its left and right sides are evenly spaced and marking that using tape.
Step 3: After marking the installation area, mount the light bar and carefully peel off the adhesive tape, making sure that you don't contaminate it in the process.
Step 4: Next, check the position of the lighting component and do the necessary adjustments when necessary.
Step 5: After that, connect the tailgate light bar to its proper wires and use tie wraps to make the installation are clean.