Select Your Vehicle

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Washer Reservoir

 Shop Washer Reservoir

Visibility is the key to safe driving, and to be able to achieve this, you need to keep your windshield clear all the time. Good thing your vehicle is equipped with a windshield washer, which enables you to keep the windshield clean during summer and unfrozen during winter. If you think you have a leak in your washer assembly, check the reservoir right away for any cracks or holes. If you find any of the two, see if they can still be patched. If not, then it would be best to get a replacement washer reservoir right away. Here's a brief and basic guide about flushing and changing this important washer component.

Flushing a Washer Reservoir

Sometimes, the washer assembly can get clogged and this usually happens when the reservoir is dirty. If left unchecked, these impurities will reach the hose, nozzle, and pump of the washer and cause problems. Prevent this from happening by flushing the reservoir on a regular basis. Here's how:

Step 1: To begin, locate the reservoir, which is typically positioned at the passenger's side of the vehicle or near the back of the engine compartment.

Step 2: Once you've located it, open its lid and then use pliers to remove its hose. Note that some hoses are attached by a metal clip or a clamp, so you may need a flathead screwdriver instead.

Step 3: After taking the hose off, the fluid inside the washer reservoir should be drained. After draining it, clean it using a garden hose to spray it with pressurized water.

Step 4: Next, use a toothbrush to scrub the insides of the reservoir and then spray it with some pressurized water to drain the dirt.

Step 5: When you're done cleaning the part, reattach the hose to the reservoir and replenish the washer fluid that you drained out earlier. When it's filled, press the reservoir cap firmly to shut it close.

Replacing a Washer Reservoir

If a quick fix is not enough to repair the reservoir, then it's definitely time to get a replacement. Here's a basic guide to help you out.

Step 1: To begin, locate the reservoir, which is typically positioned at the passenger's side of the vehicle or near the back of the engine compartment.

Step 2: Depending on your vehicle, you may be able to remove the reservoir by opening the hood or by accessing it through the wheel well. To find out, it would be best to consult your vehicle's manual.

Step 3: Once you've already removed the reservoir, pull its pump off and drain it. After draining its fluid, clean it by using a garden hose to pressurize the water.

Step 4: Next, you need to remove the wiper arms, cowl top, wiring harness, and washer hose to be able to remove the reservoir itself.

Step 5: After that, mount the new washer reservoir in place and then reconnect all the components that you removed earlier. When you're done, replenish the washer fluid and cap the container to close it.

Washer Reservoir Articles

  • How to Flush and Replace a Washer Reservoir

    Visibility is the key to safe driving, and to be able to achieve this, you need to keep your windshield clear all the time. Good thing your vehicle is equipped with a windshield washer, which enables you to keep the windshield clean during summer and unfrozen during winter. If you think you have a leak in your washer assembly, check the reservoir right away for any cracks or holes. If you find any of the two, see if they can still be patched. If not, then it would be best to get a replacement washer reservoir right away. Here\'s a brief and basic guide about flushing and changing this important washer component.

    Flushing a Washer Reservoir

    Sometimes, the washer assembly can get clogged and this usually happens when the reservoir is dirty. If left unchecked, these impurities will reach the hose, nozzle, and pump of the washer and cause problems. Prevent this from happening by flushing the reservoir on a regular basis. Here\'s how:

    Step 1: To begin, locate the reservoir, which is typically positioned at the passenger\'s side of the vehicle or near the back of the engine compartment.

    Step 2: Once you\'ve located it, open its lid and then use pliers to remove its hose. Note that some hoses are attached by a metal clip or a clamp, so you may need a flathead screwdriver instead.

    Step 3: After taking the hose off, the fluid inside the washer reservoir should be drained. After draining it, clean it using a garden hose to spray it with pressurized water.

    Step 4: Next, use a toothbrush to scrub the insides of the reservoir and then spray it with some pressurized water to drain the dirt.

    Step 5: When you\'re done cleaning the part, reattach the hose to the reservoir and replenish the washer fluid that you drained out earlier. When it\'s filled, press the reservoir cap firmly to shut it close.

    Replacing a Washer Reservoir

    If a quick fix is not enough to repair the reservoir, then it\'s definitely time to get a replacement. Here\'s a basic guide to help you out.

    Step 1: To begin, locate the reservoir, which is typically positioned at the passenger\'s side of the vehicle or near the back of the engine compartment.

    Step 2: Depending on your vehicle, you may be able to remove the reservoir by opening the hood or by accessing it through the wheel well. To find out, it would be best to consult your vehicle\'s manual.

    Step 3: Once you\'ve already removed the reservoir, pull its pump off and drain it. After draining its fluid, clean it by using a garden hose to pressurize the water.

    Step 4: Next, you need to remove the wiper arms, cowl top, wiring harness, and washer hose to be able to remove the reservoir itself.

    Step 5: After that, mount the new washer reservoir in place and then reconnect all the components that you removed earlier. When you\'re done, replenish the washer fluid and cap the container to close it.