Select Your Vehicle

Select by Brand

Get Email Exclusives

Sign up for email updates on the latest exclusive offers

Wiper Refill

 Shop Wiper Refill

If you live in a place where it frequently rains, then your car's wipers are probably your best friends. Without this pair, your daily drives will become extremely dangerous not only for you but also for the pedestrians and other motorists on the road. If one of your vehicle's wipers begins to show signs of wearing, take the time to look at it ASAP. It might need some cleaning or it may already be ready for a retirement. If you're on a budget, you can always invest on a good wiper refill instead of replacing the entire wiper blade assembly. This will not only save you some cash, but it will also save you time because it's easy to install. It's also perfect for quick fixes for people on the go. To find out more about wiper refills, read this basic guide below.

Buying Tip

Before purchasing wiper refills for your vehicle, make sure you know the exact measurements of your wiper blades. To stay on the safe side, it would be best to consult your owner's manual. If you can't find the manual, you can measure the wiper blades using a tape measure.

Installation Steps

Installing a wiper refill is relatively easy. Take note, though, that the steps below may vary depending on the car that you own.

Step 1: To begin, turn the ignition key to the on position and move the wipers until they are in correct position.

Step 2: Next, choose the wiper that you're going to work on first and then turn the wiper arm away from the windshield.

Step 3: After that, remove the cap at the end of the wiper using pliers.

Step 4: Next, observe the mounting hardware that holds the wiper refill in place. If you see that it is held on by clips, pinch the clip to release the refill and slide it out. You can make the job easier by using needle-nose pliers. You may also use a flathead screwdriver to pry the clips off.

Step 5: As soon as you get the old blade out of the assembly, carefully position the new blade refill that you bought.

Step 6: When the refill is in position, push it in and pull it down to match the length of the blade. After that, you need to secure it by using the mounting components that came with it. You can also use the clips that you removed earlier.

Step 7: Attach the other wiper refill by repeating the first four steps until both wiper blades have been changed.

Maintenance Tips

  • Don't just check your wipers on the onset of a heavy downpour. To make sure that they're always in tiptop shape, you can check the wiper assembly every six months. Check the condition of the rubber refill, making sure that it's able to its job properly.
  • Prolong the life of your wiper blades by cleaning your windshield on a regular basis. Remove the dirt from the wipers using a damp cloth.