#DIY

To keep the engine running longer, I rigged up a gravity-feed fuel system using an auxiliary...

One of the most common questions I get is, “Should I change my transmission fluid if...

Taking apart the intake manifold was the first step, and let me tell you, it’s a...

Getting the new battery in requires the same maneuvering.

The concept for this commercial was clear from the start: embody the raw, unbridled energy of...

Not every dead battery is salvageable. Some fail because of internal breaks between the plates or...

Spark plugs and ignition coils are some of the most straightforward components to replace, but many...

The old module is held in place by four inverted Torx screws, and Eric uses a...

The urgency behind this project comes from bittersweet news: Southern California’s Irwindale Speedway, a high-banked half-mile...

The first step was stripping away the grime—both inside and out. Once the car was cleaned...