SINTERED BRAKE PADS

• Advance Ceramic Full Metallic HH Compound
• Will withstand friction ratings of 0.7u and does not require anyheat to deliver friction
• Advance ceramic technology allows for pads to "cool off" assoon as pressure is released from the brake lever
• Requires very little brake pressure effort under repeated braking
• Recommended for those looking for the "edge" or "ultimate" stopping feel and control

Galfer strongly recommends following these Bed-In directions:
1) Clean the brake rotor(s) with thin sand paper and water prior to newpad installation
2) Towel dry the rotor surface after sanding
3) Install the new pads and be easy with the brakes for the next 40-50 miles
Note: All Galfer brake pads must be properly "Bedded-In" to achieve maximum output and reduce unnecessary rotor wear.