Door Hinge Pin
Your car doors allow easy entry and exit to and from your vehicle. But aside from that, they also keep you safe, secure, and protected inside your ride. If you have a damaged door, your driving will surely become uncomfortable because you'll end up thinking about that broken door all the time. To prevent this from happening, find the source of the glitch ASAP. If it's not the door itself, it might be the hinge that connects the door to the vehicle's body. You might want to take a closer look at its pins. A door hinge pin secures the hinge while it provides a pivot point for your car doors. This component may be small in size, but it can actually cause you tons of hassles when it's busted. Here's a short guide that will help you learn more about this component.
Symptoms of a Broken Door Hinge Pin
Due to its small size, it may be hard to see a damaged pin at first glance. However, there are telltale signs that you can look out for to find out if you have a busted pin in your vehicle's door. Here are some of them:
If the door keeps on producing a squeaking sound, you need to lubricate it to make it easier to use. However, if the annoying noise doesn't disappear even after lubrication, then you need to take a closer look because you might have a busted door hinge pin in your midst.
A sagging door is noticeable when the door is opened. To check, take a close look at the door and find out if the hinge or the pins are damaged.
If you're unable to close or open the door properly, examine it carefully to find out if you need a replacement pin.
Door Hinge Pin Replacement
Removing and installing new door hinge pins is relatively easy. Here's a basic step-by-step guide that can help you get started. Note that some of the steps below may vary or may not be applicable depending on the car that you own.
Step 1: To begin, park your vehicle on a flat, level surface with the parking brake engaged.
Step 2: Once the vehicle is secure, open the car door and support it with the help of jack stands.
Step 3: After that, have the tip of the hinge pin face downwards and put it on top of the punch. Then, use a hammer to strike the punch and remove the top hinge pin. Remember to do this very carefully to avoid damaging your car's door.
Step 4: Next, check the alignment of the door and adjust it when deemed necessary. Then, insert the new pins in position.one pointing up and the other pointing down.and secure them in place using the punch.
Step 5: After that, lock the pins by using a hammer to secure the locking rings in place. And when everything is secure, lubricate each new door hinge pin and test if the door is working fine.